News & Blog


User Rating: 4 / 5

Star ActiveStar ActiveStar ActiveStar ActiveStar Inactive

UPSThe following is a case study of a new client that joined Ategra recently.

The company is an accounting company located in Darwin.  They had 2 servers and a UPS. Their previous IT provider had installed the UPS 2 years ago.

Recently, this company suffered a power failure and the UPS kicked in.  However, it wasn't a smart UPS which means that the servers did not begin the process of shutting down.

Furthermore, the batteries were faulty which means that even if the UPS sent a signal to the servers to shut down, there wasn't enough juice in the batteries to let the servers do that.

This company is now paying for specialist data recovery at $5,000 and $10,000 to recover their data.  To make things worse, their last backup was March 2012 - over 6 months ago!

Even in the event they had a recent backup, which they didn't, the company would have to pay for an IT consultant to restore their backup.

We highly recommend you take this opportunity to manage this serious risk and keep your business functioning without disruption.

Below are some questions normally asked regarding a UPS.

What is a UPS?
A UPS is basically a smart battery pack and power surge protection device for your server. In the event of a power outage, the server keeps running on the power of the batteries.

Why is this important?
If your server encounters a power outage, there is chance that the data on the server could become corrupted.  If this occurs, you may lose time and money trying to restore data from backups.

We already have a UPS, why can't we keep using that?
You may already have a UPS, but this only half the solution. If your UPS isn't "smart" enough to realise it is running on batteries, the server will just run the batteries dry. Once the batteries have been exhausted, the server shuts down abruptly and the chances of data loss are still present.

So what do we need then?
What you really need is a UPS that detects the power is out and then automatically starts to shutdown the server. This is called a graceful shutdown. This allows the server to process everything it needs to while the batteries are available. We can also check and see if your server has the ability to automatically start up again once the power is restored.

OK, what is this going to cost?
Depending on your environment and setup.  A UPS can cost around $900 for a quality entry level unit to support 1 server, a cheapo $350 on from a chainstore may have similar specifications, but just don’t cut the grade.

What on-going maintenance is required for a UPS?
he batteries in the UPS usually last 1-2 years. So it is common that every year or so the batteries and associated service items need to be replaced.   Also, every three months we perform a UPS test to ensure it is working as expected and continues to protect your data. If all is well, we expect this will take 45 minutes of our time.

Do I really need a UPS?
If you want to manage your business risk properly then yes, absolutely no question in the Northern Territory
Contact Ategra and mention this article for a FREE assessment and report of your current risks to your IT Network

Share this on:
share on twitter Share on Google + share on facebook

Guaranteed Rapid Response

Latest News from Ategra

FREE IT Newsletter

  • Get the latest news, views, ideas.

  • Get free tools, tips and resources.

  • Start to relax and stop stressing about your IT.

Subscribe now!

Ategra Pty Ltd | Ategra Computer Technology

Ategra home 35 Georgina Cres, Yarrawonga, Palmerston, NT 0830, Australia
Postal: PO Box 152 Palmerston 0831  
Ategra phone Phone: 08 8932 7888
Fax: 08 9476 6023
Ategra opening times Business Hours:
Mon ~ Fri: 8:00am - 5:00pm
Ategra email